Let the hand that has never experienced a bad Internet connection be raised. It is true that, in some cases, the problem is in the configuration of the router or in the service offered by the network provider. But, most of the times, a bad Wi-Fi signal occurs due to the proximity to certain objects or furniture that we have in our homes.
Naijaroko wants to tell you which are your wifi’s biggest enemies. At the end of the article you will find very important tips. Do not miss them!
1. Furniture and metal surfaces
Metal is a conductor, which means that it absorbs electricity. As the waves emitted by the wifi are electromagnetic, any metal surface that is inside a house will stop the propagation of these. If you want your Internet to work without problems it is important that you place the router away from the metals.
Some walls interrupt wifi signals. Amongst the main materials that prevent a good connection are marble, cement, concrete, plaster and bricks. This explains why two-story houses usually suffer with a very low Internet signal at one level. To solve this, place your router in a free area and away from walls.
Any material that has the ability to reflect can affect the signals emitted by a router. This object works like a shield, and usually bounces the Internet connection, so when it is near the router, it can cause the signal strength to feel slower or the connection to be interrupted.
4. Refrigerators and washing machines
In general, appliances that have pipes in which water circulates are not very friendly with the Wi-Fi signals. Yes. This liquid has the ability to retain some energy from wireless waves, which negatively affects the quality of the Internet connection.
5. Christmas lights
The colorful Christmas lights can also be the cause of a low wifi signal in your home. These have sparkling chips that generate a magnetic field that interacts with the wave emitted by the router. In the month of December, do what you can to keep the router away from your Christmas tree.
6. Baby monitors
These monitors generate an interference of 2.4 GHz, the same as wifi. When two or more sources emit the same frequency, they use air to transmit their data and not to carry waves, as is the case of wireless Internet. Although baby monitors usually need a connection to the network to work, avoid being close to the device emitting wifi.
Drones are another device that also operates at 2.4 GHz, but not all models can generate that interference. It depends on the power that each one needs to function.
This is another device that has a frequency spectrum very similar to that used by wifi. If you have your router near a microwave, you should raise the device to a place higher than the level of the microwave. This will considerably reduce the negative impact that the appliance can generate on the connection.
Bonus: how to improve your wifi connection
There are different measures that can be taken to improve wifi signals in your house. Keep them in mind if your Internet connection is often weak:
1. Based on the objects indicated above, choose a good place to place your router.
2. Keep your router updated.
3. Get a stronger antenna.
4. Encrypt your wifi and protect it with a secure password that can not be easily guessed.
5. Buy a wifi amplifier, also known as an enhancer.
6. Seeks to use the latest and most modern Wi-Fi technologies.
7. Broad bands operating at 5 GHz usually provide a much faster connection than others, precisely because it is a less busy channel than the 2.4 GHz range.
8. Always remember to reset the router, even if it sounds cliché. By doing this, you will erase the device’s memory, which will allow you to install your updates.
Do you usually suffer with a bad Wi-Fi connection? Do you have any advice to add to our list? Tell us in the comments.